Fleet graphics
Fleet graphics keep working vehicles looking consistent wherever they travel in Durban and across KwaZulu-Natal. We print and fit branded graphics for small mixed fleets and larger roll-outs, with layouts sized to suit each vehicle type and daily use.

What is included in fleet graphics
Fleet graphics cover the repeated branding applied across two or more vehicles so the whole set reads as one fleet. That can be simple cut vinyl lettering on delivery vans, partial printed graphics on service bakkies, or fuller wraps for vehicles that spend most of the day on the road. We match the main logo, colours, contact details and key messages across each unit while allowing for differences in body shape, door lines, handles and windows.
For Durban operators, materials need to handle heat, rain, road grime and coastal humidity. We use outdoor print media and laminates suited to regular washing and sun exposure, then size each panel so joins fall in practical places and doors can still open cleanly. If your fleet also includes trailers or boats we can align the look across those items as well, which helps at launches, expos and site work.
- Cut vinyl logos, registration details and contact text
- Printed and laminated side panels for vans, cars and bakkies
- Bonnet, tailgate and rear window perf options where suitable
- Numbering, unit IDs and route or service labels
- Matching graphics for trailers, support vehicles and selected marine craft
How the rollout works
We start with the vehicle list and a clear idea of what must appear on every unit. From there we map the graphics to each vehicle type, note any problem areas such as rivets, recessed panels or damaged paint, and confirm the fitting order. Fleets often come through in batches so your vehicles are off the road for the shortest practical time.
The process is straightforward and it saves time if one person on your side signs off the final layout set. That keeps colour and wording consistent across the whole job.
- Vehicle audit: make, model, quantity, colour and condition check
- Graphic layout: scaled visuals for each body shape
- Approval: wording, placement and sizing confirmed before print
- Production: print, laminate, contour cut and kit each vehicle set
- Prep and fit: clean surface, remove old vinyl if needed, install and trim
- Handover: final inspection with care notes for the operator
What you need to prepare before fitting
Good prep makes fleet fitting faster and cleaner. Vehicles should arrive washed, with mud removed from wheel arches, door shuts and lower panels. Any old decals must be declared in advance because adhesive residue and paint fade under previous graphics can affect the finish. If a vehicle has been resprayed recently, let us know before booking the fitment slot.
Please also check that licence discs, permit stickers and safety notices are current and placed correctly. We can work around them, but moving statutory items at the last minute slows the job a bit. If your fleet runs on tight delivery schedules, send us the roster so we can plan around peak use times.
- A full vehicle list with quantities and body types
- Your logo files in usable vector or high resolution format
- Preferred wording, service areas and unit numbers
- Access notes for depots, workshops or marina locations
- Confirmation of damaged panels, fresh paint or rust spots
How pricing is worked out
Fleet graphics are quoted by scope rather than by a flat rate. The main factors are the number of vehicles, the size of the graphics on each one, the material type, print coverage, laminate choice, removal of old branding and how many fitting visits are needed. A one-colour cut vinyl set for ten white vans is very different from a mixed fleet with full colour wraps on cars, bakkies and boats.
Access and downtime matter too. If all vehicles are available at one depot the job is generally simpler than fitting the same quantity over several sites in Durban and along the KZN coast. We also look at whether the branding can be repeated exactly or whether each unit needs route names, legal markings or unique numbering. For a proper figure, send the fleet list and use the contact form for a quote.
Typical materials and fitting specs
Most fleet jobs use cast or polymeric self-adhesive vinyl depending on the curve level of the bodywork and the expected service life. Printed graphics are usually laminated for extra abrasion and UV protection. On windows we may use perforated film where visibility and local rules allow, and on flat utility panels we can use simpler cut vinyl to keep the look neat and easy to replace.
Every installation area is checked for contamination, wax and loose paint before application. In coastal conditions, salt residue can catch you out so surface cleaning is not rushed. Vehicles that work in direct sun may need to be brought under cover for fitting so the film settles properly and edges bond well.
- Outdoor-grade vinyl for flat, curved or compound curved panels
- Gloss or matt overlaminate depending on finish and cleaning needs
- Contour cut logos, text and safety markings
- Window graphic options where legally suitable
- Batch labelling to keep multi-vehicle kits organised
Aftercare and replacing damaged sections
Fresh graphics should not be washed immediately. We will advise a settling period after fitment, especially in cooler or wet weather. After that, hand washing with mild detergent is the safest option for longest life. Strong solvent cleaners, stiff brushes and high-pressure water aimed directly at panel edges can shorten the life of the film.
For working fleets, small repairs are normal. A scraped tailgate or a replaced fender does not always mean redoing the whole vehicle. Because fleet kits are standardised we can usually reprint and refit the affected panel or section if the artwork has stayed the same. If your vehicles are sold on regularly, ask us to plan the graphics in modular sections. It makes future removals and panel repairs simpler, and keeps branding tidy over time.
What our Printing and Signage customers say
Verified Google reviews
Questions we get asked
Can you brand a mixed fleet with different vehicle shapes?
Yes. We scale the same identity across different makes and body types so the fleet still looks consistent, even when vehicles are not identical.
Do the vehicles need to be clean before installation?
Yes. Vehicles should arrive washed and free of mud, oil and heavy wax. We do final surface prep before fitting, but very dirty vehicles slow the job and can affect adhesion.
Can damaged graphics be replaced without redoing the full set?
In many cases yes. If only one panel or section is damaged we can usually reprint that area and refit it, provided the underlying paint and panel are sound.
Also worth a look




Ask for a quote
Use the contact form to tell us what you want printed, where it will be used and whether fitting is needed, and Galloping Naartjie will reply with a quote.
Open the contact form
