Vehicle wraps
Galloping Naartjie supplies full and partial vehicle wraps for road vehicles across Durban and KwaZulu-Natal. We print, prepare and fit wraps for everyday business use, with materials chosen for outdoor exposure, road dirt and coastal conditions.

Full and partial wraps for working vehicles
A vehicle wrap covers painted body panels with printed vinyl so your branding travels with the vehicle. Some clients choose a full wrap to change the whole look of the vehicle, while others choose a partial wrap that covers selected panels only, such as doors, tailgates, bonnets or rear quarters.
We wrap common road vehicles used by local businesses, including cars, bakkies, vans and light delivery vehicles. For Durban roads and coastal air, material choice matters. We use outdoor print media and laminate suited to sun, rain, washing and normal day to day use, with fitment planned around curves, handles, mirrors and recesses.
- Full wraps for near complete colour and graphic coverage
- Partial wraps for sides, rear sections or key panels
- Printed branding for single vehicles or multiple units
- Cut vinyl details for registration numbers, contact details and simple markings
- Optional window graphics where legally suitable and visibility is maintained
What is included in the service
The wrap service covers the practical work needed to move from approved artwork to a fitted vehicle. We start by checking the vehicle type, panel condition and the coverage you want. From there we plan panel breaks, joins and fitment around trim so the finish looks clean and holds properly.
Printed wrap work normally includes production of the graphics, overlamination for protection, panel trimming, surface preparation and installation. We also check areas that often cause problems later, such as chipped paint, fresh respray sections, unsealed body repairs and heavy polish residue. If any panel is not fit for wrapping we will point it out before print goes ahead.
- Vehicle assessment and measurement
- Coverage planning for full or partial wraps
- Print production and protective laminate
- Surface cleaning before fitting
- Professional installation to exterior panels
- Basic handover and aftercare guidance
The process step by step
Once you send your enquiry through the contact form, we confirm the vehicle type, the number of vehicles and the areas to be wrapped. If you already have artwork, we check scale, image quality and layout. If not, we work from your supplied branding elements and coverage brief.
Next we measure or verify factory dimensions and set up the print panels with bleed for trimming. Before installation, the vehicle is washed properly and should arrive free of wax, mud, tar and silicone based dressings. The fitter then cleans all target panels again, removes small obstructions where needed and applies the wrap section by section.
After fitting, edges are checked, heat set where required and the vehicle is inspected before collection. On complex wraps we may ask that the vehicle stays off the road for a short settling period. This helps the adhesive bond correctly especially after a damp coastal morning or if there has been recent rain.
How to prepare your vehicle before fitment
Good preparation saves time and prevents failures later. A wrap does not hide poor paintwork, dents or loose trim. In fact, those faults can become more visible once a graphic is applied. If the vehicle has had body repairs, the paint must be fully cured before wrapping. Fresh paint and vinyl do not mix well if rushed.
Please remove personal items from the vehicle before drop off and tell us about any alarm issues, damaged handles or panels that do not open correctly. If there are magnets, old decals or reflective strips on the body these should be discussed in advance, as adhesive residue can slow the job down a bit.
- Bring the vehicle clean and dry
- No polish, tyre shine overspray or silicone residue near panels
- Report any resprayed or repaired areas before booking
- Fix loose trims, broken clips and rust spots first
- Allow access to the vehicle for the agreed fitment period
How wrap pricing is worked out
Vehicle wrap pricing is based on scope rather than a flat rate. The biggest factors are the size of the vehicle, how much of it will be wrapped and how complex the body shape is. A small hatchback with flat panels is quicker to produce and fit than a long wheelbase van with deep recesses, mouldings and multiple doors.
Print coverage, laminate type, the condition of the vehicle and the amount of trimming around badges, handles and hardware also affect the quote. Partial wraps can be more economical where you only need side impact branding, while full wraps use more material and more fitting time. If you need a quote, send the vehicle details and a few photos through the contact form.
Typical specs and aftercare
Most road wraps are printed on cast or high grade polymeric vinyl depending on the job, then laminated for extra protection against abrasion, washing and UV exposure. Panel joins are planned to suit the vehicle shape, and high stress areas are post-heated where needed. For Durban conditions, regular cleaning makes a noticeable difference because salt in the air and fine road grime can shorten the neat appearance of a neglected wrap.
After collection, wash the vehicle with mild soap and water rather than harsh solvents or abrasive brushes. Avoid pressure washing directly into edges, especially in the first few days. If a corner lifts, do not press it down with glue or tape. Send an enquiry through the contact form and we will advise on the next step.
- Outdoor print vinyl with protective laminate
- Gloss, matt or selected speciality finishes depending on availability
- Applied to painted metal panels and suitable smooth surfaces
- Not recommended over failing paint, rust or unsealed filler
- Hand washing is preferred for longest life
What our Printing and Signage customers say
Verified Google reviews
Questions we get asked
How long does a vehicle wrap take to fit?
It depends on vehicle size, wrap coverage and panel complexity. A partial wrap is usually quicker than a full wrap, and vehicles with many recesses or accessories take longer.
Can you wrap over chipped or newly painted panels?
Chipped, unstable or freshly painted panels should be discussed first. Wrap vinyl needs properly cured paint and a sound surface, otherwise lifting or paint pull can happen.
Do you only do business vehicles?
No. We wrap private and business vehicles, provided the job is suitable for road use and the panels are in good enough condition for vinyl application.
Also worth a look




Ask for a quote
Use the contact form to tell us what you want printed, where it will be used and whether fitting is needed, and Galloping Naartjie will reply with a quote.
Open the contact form
